AJA Gen10 Sync Box

• HD Tri-level sync generation
• Two groups of independently switchable outputs allows simultaneous HD and SD sync generation
• Assignable in two groups to either HD or SD (4 BNCs: Outputs 1 through 4, 2 BNCs: Outputs 5 through 6)
• Power Supply Range: 5-18VDC
• External Dip Switch Configuration

AJA HI5 HD-SDI to HDMI

• SDI or HD-SDI to HDMI for driving HDMI monitors
• Output HDMI with embedded audio, 24-bit (selectable by internal jumper: 2 or 8 channels)
• Audio in/out also 2 channel RCA-style outputs at -10dBV (nominal), Ch. 1 and 2
• 1 Looping SDI/HD-SDI output of the SDI input (for "Daisy Chain")
• Input SMPTE-259/274/292/296 SDI/HD-SDI, 1 x BNC
• Size: 4.6" x 2.4" x 1" (117 x 61 x 25mm)

AJA HD5DA 1x4 HD-SDI Distribution Amplifier

• Auto Input
• Small Footprint
• Four seperately buffered HD-SDI outputs
• Power via V-Mount or Gold Mount

BlackMagic SDI to HDMI

• SD, HD and SDI (3 Gb/s) video input
• 2 channels of professional balanced analog or digital audio with standard 1/4 inch jack connections
• SDI Redundant input Automatically switches over if main SDI input is lost
• Auto detection of HD or standard definition SDI inputs

AJA KiPRO

• SD and HD-SDI (1xBNC), HDMI Digital Inputs and Outputs
• SD/HD Component (3xBNCS) Analog Inputs adn Outouts
• Embeded digital audio and Anolog Dual XLR audio inputs and outputs
• Network capable
• LTC timecode input and output via BNC
• Records to all flavors of ProRess

Denecke SB-T Timecode Box

Arri FF4 Follow Focus

• Compatible with 19mm, 15mm or 15mm-lightweight rods.
• Includes whip, speed crank, and dumb-side wheel
• No "play" gearing
• Interchangeable pitch gears
• Quick release mounting

Arri MFF-2 Follow Focus

• Compatible with 15mm-lightweight rods.
• Includes whip, speed crank
• No "play" gearing
• Interchangeable pitch gears
• Quick release mounting

Redrock microTape

• Can be used safely on any type of subject (objects, animals, people, etc)
• Can be mounted directly on the camera rig

Cinetape Measure System

• Continuous camera to subject measurement
• Ultra-sonic technology is invisible to camera

RT Motion Wireless Follow Focus

• Wireless control

Preston FIZ 1 Wireless Follow Focus

• Wireless control

Preston Microforce Digital 2

• Programmable soft stops
• Speed control knob with a digital readout
• Automatic lens calibration
• Electronic limit setting
• Bright led displays of zoom position and speed setting
• Power Requirements: 12 - 28 VDC

CMOTION Cvolution Wireless Lens Control System

• Allows control of up to 8 motors
• Synchronized focus, iris, zoom and 3D capable
• 32 points of lens matching per scale
• Synchronized camera start/stop
• IO and convergence control option
• Wireless picture option
• Intelligent lens data display option
• Fps and depth of field ramping option
• Autofocus option with cfinder or cinetape
• Daufenbach Camera owns the first system to be sold in America!

Arri MB14 Matte Box

• (4) 6" x 6" filter holders
• 18mm - 180mm mask set
• Swing away rod mount

Arri MB18 Matte Box

• (3) 4x5.65"
• Swing away design

Arri MB19 Matte Box

• (3) 4x5.65"- 2 rotating, 1 fixed
• (1) 138mm circular filter tray
• Can mount with lightweight 15mm support rods or studio 19mm support rods
• Swing away design

Arri MB20II Matte Box

• (3) fully rotatable 4" x 5.65" filter stages
• (1) 138mm circular filter tray
• Swing away rod mount

RedVolt Battery

• Powers the Red Epic for 30 minutes

Anton Bauer Dionic HC Battery

Anton Bauer Power Kit

Anton Bauer VCLX Cine Block Battery

• Size: 10.00 x 12.75 x 5.50 inch (25.40 x 32.39 x 13.97 cm)
• Weight: 25.0 lbs (11.3 kg)
• Power Outputs: (2) 4p XLR for 14.4v and (1) 3p XLR for 28v
• Provides Dual simultaneous outputs (20 amps@ 14.4v ; 12 amps @28v)
• Realtime life display

Panasonic VW-VBG6 Lithium-Ion Battery

• Output Voltage 7.2V
• Capacity 5400mAh

Red Brick 140Wh

• 12v Brick Battery
• V-mount connection
• Intelligently communicates with Red camera

Anton Bauer T2 Charger

Anton Bauer TM4 Quad Charger

• Weight: 5.0 lbs (2.3 kg)
• 70 Watt, 16VDC Power Supply Output
• 4 Position Simultaneous Fast Charging
• Remote USB software upgrade capability
• Compatible with any Anton/Bauer Logic Series battery

Anton Bauer Quad 2702 Charger

• Weight: 4.1 lbs (1.9 kg)
• 4 position sequential charging
• 70 Watt, 16VDC Power Supply Output
• Multi-function LCD readout
• Compatible with any Anton/Bauer Logic Series battery

RedVolt Charger

• Typical time to full charge is 2 hours

Red Battery Charger

• Charges two RED brick batteries at once
• Powers RED One cameras with a RED DC Power Cable
• Compact and Lightweight

Anton Bauer QBH-HD Battery Charger

• Outputs to both 14.4 and 28.8 Volts simultaneously
• Three 4pin XLR outputs(14.4v)
• A 2pin Amphenol output (28.8V)
• Weight: 2lbs (0.9kg)

Ronford Baker Quick Release Plate

• Works with many tripod systems.

O'Connor 1030D Fluid Head (Mitchell)

• 100mm Mitchell Base
• Capacity: 30 lbs (13.6 kg)
• +/- 90 Degree Tilt Range
• Stepless, ultra-smooth pan and tilt fluid drag

O'Connor 2060HD Fluid Head (Mitchell)

• 150mm Mitchell Base
• Capacity: 83lbs (37.7kg)
• +/- 90 Degree Tilt Range
• O'Connor's patented sinusoidal counterbalance system
• Stepless, ultra-smooth pan & tilt fluid drag

O'Connor 120EX Fluid Head (Mitchell)

• Collapsible crank knob and digital readout make counterbalancing the payload easy
• New sideload mechanism features a push-and-turn knob for precise adjustment of the fore/aft platform
• Capacity: 240 lbs. (109 kg)
• 150mm Mitchell Base
• +/- 90 Degree Tilt Range

Sachtler Video 15 SB Fluid Head

• Supports 2-35 lbs
• 100mm bowl fluid head
• Weight is 15.6 lbs

Sachtler 7+7 Studio II Fluid Head

• Heavy Duty construction
• Capacity: 110 pounds
• +/- 75 Degree Tilt Range

Ronford-Baker Standards (Mitchell)

• Minimum Height: 3'
• Maximum Height: 5' 6"
• Weight: 22 lbs
• Mitchell Mount

Ronford-Baker Baby Legs (Mitchell)

• Minimum Height: 1' 8"
• Maximum Height: 3'
• Weight 11lbs
• Mitchell Mount

Ronford-Baker Standard Rolling Spider

• Weight: 22 pounds (10Kgs)
• Made from High Tensile Alloy
• Folds flat and locks for easy transport and storage.

Hi-Hat (Mitchell)

• Hight: 4.5"
• Mitchell mount
• Mount made from Machined aluminum casting
• 3/4" plywood mounting board with hand grips

Low-Hat (Mitchell)

• Hight: 1.75"
• Mitchell mount
• Mount made from Machined aluminum casting
• 3/4" plywood mounting board with hand grips

Element Technica Mantis Handheld System

• Dovetail interface allows quick setup; 20 seconds from tripod to hand held
• Multi axis adjustment allows shoulder pad to conform to any shoulder
• Fore/aft linear adjustment shoulder pad
• Designed specifically for Arriflex style Hybrid bridge plates (435, Arricam, Moviecam, Phantom, etc.)
• Telescopic and rotating handle extensions
• Mounting point for ViewFactor Origo remote start/stop button

Moose Bars

• High tensile aluminum
• Soft foam grip handles
*Rods not included

15mm Iris Rods

19mm Iris Rods

Element Technica 12" Arri Dovetail

• Outside edge matches with Oconnor heads replacing the Oconnor Euro quick release plate
• Weight: 1.5lbs (.6Kgs)

Element Technica 18" Arri Dovetail

• Outside edge matches with Oconnor heads replacing the Oconnor Euro quick release plate
• Weight: 2.5lbs (1.2Kgs)

Element Technica Hybrid Bridge Plate (15 or 19mm)

• Weight 11.2 oz (318g)
• Fully Modular
• Converts to 19mm, 15mm, 15mm LW Rods
• Supports Arri, RED Cameras, and many others

Filmtools Junior Camera / DIT Cart

Yaeger Senior Camera Carts

• Built-in Mitchell mount
• On-cart dovetail mount
• Collapses into "Case Form" for easy transporting
• Includes battery powered clamp-on work light
• Has two baby spuds for monitor mounting
• Heavy duty rubber wheels for on-location filming
• Welded steel joints, for maximum weight capacity

Rubbermaid Camera Cart

• Pneumatic swivel wheels with break-locks
• Lightweight plastic body for easy off loading from a vehicle without a lift-gate

SONY PVM1741 OLED 17" Monitor

• External remote control capability for input/output signal selection
• Ethernet (10BASE-T/100BASETX) connection

Sound Devices PIX 240 Monitor and Recorder

• Records Audio from camera or from a direct line
• Plays back recorded files
• Takes files names directly from cameras metadata
• Records Apple Pro Res or Avid DNX files
• Outputs both Timecode and Genlock
• Records to SSD Drives or CF Cards
• View manual

TV Logic VFM-056W 5.6" Monitor

• 5.6" Multiformat 1280 x 800 Resolution
• Power using Panasonic or Canon batteries
• Accepts HDMI/HD-SDI/Analog inputs
• View manual

Marshall OR-70-3D 7" 3D Field Monitor

• 7" Multiformat 1600x600 Resolution
• 3G-SDI Input with Loop-Through
• Dual Real-Time Waveform, Vectorscope and Image Processing Analysis
• Precision white balance and gamma
• Red/Green/Blue Mono Channel
• Glasses-Free Display!

Panasonic 8" BT-LH80WP Monitor

• 800 x 480 pixel WVGA resolution panel
• Displays 4:3 aspect ratio images
• RS-232C and GPI remote control terminals

Panasonic BT-LH910 9" Monitor

• 9" Multiformat 1280 x 768 Resolution
• 15:9 Aspect Ratio
• W-LED Backlight
• Focus Assist Option
• Accepts HDMI/HD-SDI/Analog inputs

Transvideo CinemonitorHD 12" Monitor

Panasonic BT-LH1710 17" Monitor

• 17" Multiformat 1280 x 768 Resolution
• Waveform monitor and vectorscope displays all picture lines (via HD-SDI / SDI input)
• Marker and blue-only function
• Durable, die cast aluminum frame
• Quiet operation (No cooling fan)

JVC GD-463D10 46" Passive 3D Monitor

Wevi Wireless HD Video Transmission

• Multiple video formats and profiles including 1080i/23.98PsF
• Automatically detects between HD-SDI and SD-SDI signals
• Transmission range of 150 feet line of sight or up to 100 feet through walls (actual range may vary depending on site conditions)
• 2-channel embedded audio ensures no signal interference for complete audio/video synchronization
• Uses integrated V-Mount for camera and battery connection; fully compatible with ENDURA batteries
• Selection of 4 manual channel frequencies--ideal if operating multiple systems in close proximity

Red CF Card - 16GB

• RED's own cards, engineered to handle the tremendous amount of data 4k footage comprises.
• Stores 8-10 min of footage, or roughly 800' of film

SD-HC Card - 16GB

• Records roughly 1 hour per card
• Fully compatible with SD 3.0 Standards
• SDHC Class 10 compliant
• Easy to use, plug-and-play operation
• Built-in Error Correcting Code (ECC) to detect and correct transfer errors
• Supports Content Protection for Recordable Media (CPRM)
• Allows In System Programming (ISP) for updating firmware
• Mechanical write-protection switch

Sound Devices PIX 240 Monitor and Recorder

• Records Audio from camera or from a direct line
• Plays back recorded files
• Takes files names directly from cameras metadata
• Records Apple Pro Res or Avid DNX files
• Outputs both Timecode and Genlock
• Records to SSD Drives or CF Cards
• View manual

Sennheiser Evolution 100 Series G3 Kit

• Includes receiver/transmitter sets, plug-on transmitter, and ME2 lavalier microphone.

KamCoat Camera Rain Cover

• 100% Waterproof raincover
• Secured under strong velcro closures
• Elastic cords tighten around the lens and viewfinders
• Fits the RED One with lens, and cameras of comparable size